888.768.3243

DRILLING & TAPPING UNITS

Drilling & Tapping Units

drilling and tapping units                drilling and tapping unit alternative version

Typical operations performed are drilling, drill-tap ( single pass tools), reaming, and milling.

SOTECH feed units are highly efficient (up to 78%) and maintenance-free, and we guarantee it with 4000 hours or 2 years of limited warranty.

Superior by design, with the pneumatic thrust force applied to the rotating spindle with the hydro check feed control concentric in line, no offset forces.

Other key features of the DU model drill feed units are:

Perfect depth stop, with large nut, holding =/- 0.001″ depth

Fully hardened/ground spindles and quill to carry multispindle heads or saw heads
Large bearings and TIR of +/-.0005”
No mounting limitations and can rotate CW/CCW
Safety: All controls in the back of the unit, away from the tool

TOP SELLER is:DU10P.50 DU10P catalog page here

SOTECH has hundreds of case histories with drillfeed units. Please contact us with your requirements.

Call for Info and Drawing 1-888- 768-3243.

VALUE, QUALITY, WARRANTY!

TAPPING UNITS Leadscrew with Servomotors

leadscrew with servo motorSOTECH tapping units are an all electric brake motor powered design with fast cycles and high numbers of reversal in mind. The concentric feed design, with the leadscrew direct driving the quill and spindle in centerline, makes it the most energy efficient unit. Long stroke units use an air rapid approach cylinder for 6“ of reach.

The optional Servo Motor drive, combined with a simple leadscrew design, make it flexible for multiple thread pitches to be run on the same tapping unit. All spindles have quick-release tap driver collets.

One pass drill-tap units are also available for through-hole threads of equal or less thickness to the tap diameter.

Your threads will be to the drawing specs and with a sharp end, no compromise!

BEST Selling unit: Model TM10.60 ½” capacity in aluminum 2.3” stroke TM10.60 catalog page here

VALUE, QUALITY, WARRANTY!

Click to View our current Line Catalog